I recently setup a few new cameras on my BlueIris box, however one camera in particular was giving me problems. I tried a few different configurations and each time I got a no signal error. I could change the IP to another camera and all was well, but this one in particular was angry at me. I could log into the web interface and view the feeds, so I knew it was working, it just had something up in the configuration. I ended up looking at the Blue Iris status UI to see that I was getting about 1.5FPS through with a slightly lower bitrate than the camera was configured to at the time. I updated the camera config to drop the bitrate and voila, signal, smooth video.<\/p>\n\n\n\n
The root cause is something in the cable, either too much interference from AC wiring, or an end isn’t as well crimped as it could be. Either way, I got my camera up in my Blue Iris instance and things worked fine after that.<\/p>\n\n\n\n
<\/p>\n","protected":false},"excerpt":{"rendered":"
I recently setup a few new cameras on my BlueIris box, however one camera in particular was giving me problems. I tried a few different configurations and each time I got a no signal error. I could change the IP to another camera and all was well, but this one in particular was angry at … <\/p>\n